+
A precise, parameterized spacer block designed to mount Clipsal 1044TA switches seamlessly onto Acupanel (Contemporary range – 27mm slat, 13mm gap) profiles.
Specification Text
"Surface-mounted mechanical levelling spacer (FlatClad Ref: FC-TA-2WI5NT) to be installed behind all electrical wall plates on The Wood Veneer Hub Acupanel (Contemporary range – 27mm slat, 13mm gap) surfaces. Refer to flatclad.com for fit verification and safety notices."
Specification Text
"Surface-mounted mechanical levelling spacer (FlatClad Ref: FC-TA-2WI5NT) to be installed behind all electrical wall plates on The Wood Veneer Hub Acupanel (Contemporary range – 27mm slat, 13mm gap) surfaces. Refer to flatclad.com for fit verification and safety notices."
Cladding Specs
- Pitch
- 40mm
- Relief Depth
- 10mm
- Groove
- 13mm
Device Specs
- Model
- 1044TA
- Dimensions
- 148 × 74mm
- Mount
- Standard AU mounting, 120mm centres (4-gang / wider cut-out)
Product Also Known As
The Wood Veneer Hub Acupanel (Contemporary range – 27mm slat, 13mm gap)
Clipsal Solis T Series
Other Clipsal Solis T Series Products
Important notes
- Mechanical OnlyOur spacers are mechanical levelling spacers only and are intended to work in compression (not as structural supports).
- Non-ElectricalThey are not electrical equipment, do not provide a gasket or weather seal, and do not carry IP/BAL ratings.
- Licensed InstallationInstallation must be performed by a licensed electrician as part of a compliant electrical installation.
Need to find this combo again? You can search for FC-TA-2WI5NT directly on our homepage.