+
A precise, parameterized spacer block designed to mount Clipsal 1042TA switches seamlessly onto Timbertop Slat Acoustic Panel (FilaSorb 12 + 13mm woodgrain finish) profiles.
Specification Text
"Surface-mounted mechanical levelling spacer (FlatClad Ref: FC-AT-BKR1QB) to be installed behind all electrical wall plates on Acoufelt (Timbertop) Timbertop Slat Acoustic Panel (FilaSorb 12 + 13mm woodgrain finish) surfaces. Refer to flatclad.com for fit verification and safety notices."
Specification Text
"Surface-mounted mechanical levelling spacer (FlatClad Ref: FC-AT-BKR1QB) to be installed behind all electrical wall plates on Acoufelt (Timbertop) Timbertop Slat Acoustic Panel (FilaSorb 12 + 13mm woodgrain finish) surfaces. Refer to flatclad.com for fit verification and safety notices."
Cladding Specs
- Pitch
- 56mm
- Relief Depth
- 1.5mm
- Groove
- 13mm
Device Specs
- Model
- 1042TA
- Dimensions
- 148 × 74mm
- Mount
- Standard AU mounting, 84mm centres
Product Also Known As
Acoufelt (Timbertop) Timbertop Slat Acoustic Panel (FilaSorb 12 + 13mm woodgrain finish)
Clipsal Solis T Series
Other Clipsal Solis T Series Products
Important notes
- Mechanical OnlyOur spacers are mechanical levelling spacers only and are intended to work in compression (not as structural supports).
- Non-ElectricalThey are not electrical equipment, do not provide a gasket or weather seal, and do not carry IP/BAL ratings.
- Licensed InstallationInstallation must be performed by a licensed electrician as part of a compliant electrical installation.
Need to find this combo again? You can search for FC-AT-BKR1QB directly on our homepage.